TMMA 100H
Marka: SKF
Model: TMMA 100H
Fiyat: 612,80 TL
BoyutlarDış kavrama genişliği: 75 – 250mm
Etkin kol uzunluğu: 250mm
Pençe yüksekliği: 13.8mm
Claw length: 24mm
Total Arm length: 416 mm
Claw width: 40mm
Hydraulic spindle, piston stroke: 85mm
Puller adaptor thread: UN 1.5 x 16 tpi
Total spindle length: 655 mm
Ürün net ağırlığı: 13.4kg
eClass kodu: 23-05-19-01
UNSPSC kodu: 27111712
Önerilen uygulamalar: For the dismounting of bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
Suitable for workpiece dismounting from a Housing: Hayır
Suitable for bearing type(s): All
Dismounting force generation: Hydraulic spindle (TMHS 100)
Özel özellikler: Spring operated opening mechanism
Kol sayısı: 3
Pulling force (max): 100kN
Spindle nose piece: yes, ⌀ 30mm
Renk: Siyah, kırmızı saplı
Malzeme: Alloy engineering steels, hardened and tempered
Kaplama: Black phosphated, red powdercoated
İçerik: 1x Puller TMMA 100H1x Mounted hydraulic spindle TMHS 1003x Spindle extension pieces, 1x Nose piece, 1x Handle, 1x Handle rod1x Printed instructions for use
Teknik özellikler
- BoyutlarDış kavrama genişliği: 75 – 250mm
- Etkin kol uzunluğu: 250mm
- Pençe yüksekliği: 13.8mm
- Claw length: 24mm
- Total Arm length: 416 mm
- Claw width: 40mm
- Hydraulic spindle, piston stroke: 85mm
- Puller adaptor thread: UN 1.5 x 16 tpi
- Total spindle length: 655 mm
- Ürün net ağırlığı: 13.4kg
- eClass kodu: 23-05-19-01
- UNSPSC kodu: 27111712
- Önerilen uygulamalar: For the dismounting of bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
- Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
- Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
- Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
- Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
- Suitable for workpiece dismounting from a Housing: Hayır
- Suitable for bearing type(s): All
- Dismounting force generation: Hydraulic spindle (TMHS 100)
- Özel özellikler: Spring operated opening mechanism
- Kol sayısı: 3
- Pulling force (max): 100kN
- Spindle nose piece: yes, ⌀ 30mm
- Renk: Siyah, kırmızı saplı
Benzer ürünler
