TMHP 50/320X
Marka: SKF
Model: TMHP 50/320X
Fiyat: 612,80 TL
BoyutlarDış kavrama genişliği: 310 – 506mm
Etkin kol uzunluğu: 320mm
Alternative arm lengths: With accessory alternative arms: 140 or 570 mm
Pençe yüksekliği: 40mm
Claw length: 32mm
Total Arm length: 663 mm
Claw width: 24mm
Spindle head, hexagon size: 30 mm
Total spindle length: 648 mm
Ürün net ağırlığı: 65kg
eClass kodu: 23-05-19-01
UNSPSC kodu: 27111712
Önerilen uygulamalar: For the dismounting of larger bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
Suitable for workpiece dismounting from a Housing: Hayır
Suitable for bearing type(s): All
Dismounting force generation: A hydraulic pump is needed to advance the piston of the hydraulic cylinder in this puller, in which a mechanical spindle is fitted. The recommended pump TMJL to connect to the hydraulic cylinder, is available as accessory.
Kol sayısı: 3
Pulling force (max): 500kN
Hydraulic Cylinder, piston stroke: 40mm
Hydraulic Cylinder, Maximum Operating Pressure: 80MPa
Hydraulic Cylinder, Oil capacity: 260cm³
Oil viscosity (maximum): 300mm²/s
Spindle nose piece: Yes, ⌀35 mm
Renk: Siyah
Malzeme: Alloy engineering steels, hardened and tempered
Kaplama: Chemical blackened
İçerik: 1x Puller TMHP 50/320X1x Printed instructions for use1x Piston hold tool1x Wooden storage crate
Teknik özellikler
- BoyutlarDış kavrama genişliği: 310 – 506mm
- Etkin kol uzunluğu: 320mm
- Alternative arm lengths: With accessory alternative arms: 140 or 570 mm
- Pençe yüksekliği: 40mm
- Claw length: 32mm
- Total Arm length: 663 mm
- Claw width: 24mm
- Spindle head, hexagon size: 30 mm
- Total spindle length: 648 mm
- Ürün net ağırlığı: 65kg
- eClass kodu: 23-05-19-01
- UNSPSC kodu: 27111712
- Önerilen uygulamalar: For the dismounting of larger bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
- Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
- Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
- Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
- Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
- Suitable for workpiece dismounting from a Housing: Hayır
- Suitable for bearing type(s): All
- Dismounting force generation: A hydraulic pump is needed to advance the piston of the hydraulic cylinder in this puller, in which a mechanical spindle is fitted. The recommended pump TMJL to connect to the hydraulic cylinder, is available as accessory.
- Kol sayısı: 3
- Pulling force (max): 500kN
- Hydraulic Cylinder, piston stroke: 40mm
- Hydraulic Cylinder, Maximum Operating Pressure: 80MPa
- Hydraulic Cylinder, Oil capacity: 260cm³
Benzer ürünler
