TMHP 30/170
Marka: SKF
Model: TMHP 30/170
Fiyat: 735,36 TL
BoyutlarDış kavrama genişliği: 290 – 500mm
Etkin kol uzunluğu: 170mm
Alternative arm lengths: With accessory alternative arms: 350 or 600 mm
Pençe yüksekliği: 35mm
Claw length: 30mm
Total Arm length: 508 mm
Claw width: 24mm
Spindle head, hexagon size: 28mm
Total spindle length: 933 mm
Ürün net ağırlığı: 76.4kg
eClass kodu: 23-05-19-01
UNSPSC kodu: 27111712
Önerilen uygulamalar: For the dismounting of larger bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
Suitable for workpiece dismounting from a Housing: Hayır
Suitable for bearing type(s): All
Dismounting force generation: A hydraulic pump is needed to advance the piston of the hydraulic cylinder in this puller, in which a mechanical spindle is fitted. The recommended pump TMJL to connect to the hydraulic cylinder, is included with this puller.
Kol sayısı: 3
Pulling force (max): 325kN
Hydraulic Cylinder, piston stroke: 50mm
Hydraulic Cylinder, Maximum Operating Pressure: 80MPa
Hydraulic Cylinder, Oil capacity: 204cm³
Oil viscosity (maximum): 300mm²/s
Spindle nose piece: Yes, ⌀33 mm
Renk: Siyah
Malzeme: Alloy engineering steels, hardened and tempered
Kaplama: Chemical blackened
İçerik: 1x Puller TMHP 30/1701x TMJL 100 Pump (complete in wooden carrying case)1x Printed instructions for use1x Piston hold tool1x Wooden storage crate
Teknik özellikler
- BoyutlarDış kavrama genişliği: 290 – 500mm
- Etkin kol uzunluğu: 170mm
- Alternative arm lengths: With accessory alternative arms: 350 or 600 mm
- Pençe yüksekliği: 35mm
- Claw length: 30mm
- Total Arm length: 508 mm
- Claw width: 24mm
- Spindle head, hexagon size: 28mm
- Total spindle length: 933 mm
- Ürün net ağırlığı: 76.4kg
- eClass kodu: 23-05-19-01
- UNSPSC kodu: 27111712
- Önerilen uygulamalar: For the dismounting of larger bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
- Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
- Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
- Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
- Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
- Suitable for workpiece dismounting from a Housing: Hayır
- Suitable for bearing type(s): All
- Dismounting force generation: A hydraulic pump is needed to advance the piston of the hydraulic cylinder in this puller, in which a mechanical spindle is fitted. The recommended pump TMJL to connect to the hydraulic cylinder, is included with this puller.
- Kol sayısı: 3
- Pulling force (max): 325kN
- Hydraulic Cylinder, piston stroke: 50mm
- Hydraulic Cylinder, Maximum Operating Pressure: 80MPa
- Hydraulic Cylinder, Oil capacity: 204cm³
Benzer ürünler
