TMHP 15/260X
Marka: SKF
Model: TMHP 15/260X
Fiyat: 612,80 TL
BoyutlarDış kavrama genişliği: 195 – 386mm
Etkin kol uzunluğu: 264mm
Alternative arm lengths: With accessory alternative arms: 344 or 439 or 689 mm
Pençe yüksekliği: 30mm
Claw length: 37mm
Total Arm length: 449 mm
Claw width: 12mm
Spindle head, hexagon size: 22 mm
Total spindle length: 758 mm
Ürün net ağırlığı: 31kg
eClass kodu: 23-05-19-01
UNSPSC kodu: 27111712
Önerilen uygulamalar: For the dismounting of larger bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
Suitable for workpiece dismounting from a Housing: Hayır
Suitable for bearing type(s): All
Dismounting force generation: A hydraulic pump is needed to advance the piston of the hydraulic cylinder in this puller, in which a mechanical spindle is fitted. The recommended pump TMJL to connect to the hydraulic cylinder, is available as accessory.
Kol sayısı: 3
Pulling force (max): 150kN
Hydraulic Cylinder, piston stroke: 100mm
Hydraulic Cylinder, Maximum Operating Pressure: 80MPa
Hydraulic Cylinder, Oil capacity: 202cm³
Oil viscosity (maximum): 300mm²/s
Spindle nose piece: Yes, ⌀25 mm
Renk: Siyah
Malzeme: Alloy engineering steels, hardened and tempered
Kaplama: Chemical blackened
İçerik: 1x Puller TMHP 15/260X1x Printed instructions for use1x Piston hold tool1x Wooden storage crate
Teknik özellikler
- BoyutlarDış kavrama genişliği: 195 – 386mm
- Etkin kol uzunluğu: 264mm
- Alternative arm lengths: With accessory alternative arms: 344 or 439 or 689 mm
- Pençe yüksekliği: 30mm
- Claw length: 37mm
- Total Arm length: 449 mm
- Claw width: 12mm
- Spindle head, hexagon size: 22 mm
- Total spindle length: 758 mm
- Ürün net ağırlığı: 31kg
- eClass kodu: 23-05-19-01
- UNSPSC kodu: 27111712
- Önerilen uygulamalar: For the dismounting of larger bearings, gears, pulleys and other industrial ring shaped components in industrial, construction and agricultural applications with an interference fit on the shaft
- Suitable for workpiece dismounting from a Cylindrical seating (straight shaft): Evet
- Suitable for bearing dismounting from a Tapered seating (conical shaft): Evet
- Suitable for bearing dismounting from a Sleeve (adapter or withdrawal sleeve): Evet
- Suitable for workpiece dismounting from a Blind arrangement (housing with shaft): Hayır
- Suitable for workpiece dismounting from a Housing: Hayır
- Suitable for bearing type(s): All
- Dismounting force generation: A hydraulic pump is needed to advance the piston of the hydraulic cylinder in this puller, in which a mechanical spindle is fitted. The recommended pump TMJL to connect to the hydraulic cylinder, is available as accessory.
- Kol sayısı: 3
- Pulling force (max): 150kN
- Hydraulic Cylinder, piston stroke: 100mm
- Hydraulic Cylinder, Maximum Operating Pressure: 80MPa
- Hydraulic Cylinder, Oil capacity: 202cm³
Benzer ürünler
