LGET 2/1
Marka: SKF
Model: LGET 2/1
Fiyat: 612,80 TL
LojistikÜrün net ağırlığı: 1kg
eClass kodu: 23-06-01-01
UNSPSC kodu: 15121902
Speed (max.) n x dm (x 1000): 300
DIN 51825 kuralları: KFK2U-40
NLGI tutarlılık sınıfı: 2
Koyulaştırıcı: PTFE
Renk: Kirli beyaz
Baz yağ tipi: Sentetik, PFPE
Base oil viscosity DIN 51562 at 40 °C: 400mm²/s
Base oil viscosity DIN 51562 at 100 °C: 38mm²/s
Raf ömrü: 5year
Paket boyutu: 1 kg can
Tek noktalı yağlama için kullanılabilir: hayır
Suitable for High load applications: ++
Suitable for Vertical shaft applications: Ο
Suitable for applications with Oscilating movements: −
Suitable for applications with Severe vibrations: Ο
Suitable for applications that require Rust protection: −
Suitable for applications that require Water resistance: +
Suitable for applications that require Frequent start-up: Ο
Çalıştırma sıcaklığı aralığı: -40 – 260°C
Dropping point (min) ISO 2176: 300°C
Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm): 265 - 295
Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm: +30 at 130°C
Water resistance (max.) DIN 51807/1, 3 hrs at 90 °C: 0
Oil separation DIN 51817, 40°C, %: 1-3
Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C: 1 max. at 150°C
Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C: 1000 at 220°C
EP performance - 4 ball - Weld load (min.) DIN 51350/4: 8000N
Corrosion protection, Emcor, ISO 11007, Distilled water: 1-1
Teknik özellikler
- LojistikÜrün net ağırlığı: 1kg
- eClass kodu: 23-06-01-01
- UNSPSC kodu: 15121902
- Speed (max.) n x dm (x 1000): 300
- DIN 51825 kuralları: KFK2U-40
- NLGI tutarlılık sınıfı: 2
- Koyulaştırıcı: PTFE
- Renk: Kirli beyaz
- Baz yağ tipi: Sentetik, PFPE
- Base oil viscosity DIN 51562 at 40 °C: 400mm²/s
- Base oil viscosity DIN 51562 at 100 °C: 38mm²/s
- Raf ömrü: 5year
- Paket boyutu: 1 kg can
- Tek noktalı yağlama için kullanılabilir: hayır
- Suitable for High load applications: ++
- Suitable for Vertical shaft applications: Ο
- Suitable for applications with Oscilating movements: −
- Suitable for applications with Severe vibrations: Ο
- Suitable for applications that require Rust protection: −
- Suitable for applications that require Water resistance: +
- Suitable for applications that require Frequent start-up: Ο
- Çalıştırma sıcaklığı aralığı: -40 – 260°C
- Dropping point (min) ISO 2176: 300°C
- Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm): 265 - 295
- Mechanical stability - Roll stability, ASTM D1831 (max.) 50 hrs at 80°C, 10⁻¹mm: +30 at 130°C
Benzer ürünler
